we are GRIZZLYSTIK AUTHORIZED DEALER!

SOLD AS 6 PACK!

(full specs for each spine, can be found at the bottom of the this description)

GrizzlyStik Momentum TDT - Thin Diameter Tapered carbon arrows with built in FOC (Forward of Center) strength, accuracy, penetration, and trajectory. 

GrizzlyStik Momentum TDT tapered arrows - We teamed up with Victory Archery with one goal - to make the best arrows for bowhunting we possibly could. 

Available in 170, 240, 320 and 400 for bows from 40# - 100# + (Depending on point slug weight and arrow length.)

These arrows had to incorporate all of our (GrizzlyStik's) required elements as well as those suggested by Victory Archery.

• Super Strong Woven Carbon - For unsurpassed structural integrity 

• A continuous .001"/inch taper from tip to tail - For built in FOC, Weight forward, Strength forward, and Spine Forward benefits 

• Tapered externally and parallel internally - Allows spine control & tuning by cutting from point or nock end 

• Thin diameter - thick walled, built on the .204" platform - For increased penetration performance and universal component compatibility 

• As light as possible - for total arrow weight versatility & control, and to optimize FOC 

• Include a tough in-outsert - To shore up the front of the arrow for hard bone-splitting hits 

• Built to precise tolerances - Making tuning, accuracy, consistency, and bow set-up a breeze 

• Include the Victory slick ICE coating - For better penetration on big game, and to minimize sticking in targets 

• Provide the highest FOC (Forward Of Center) Potential of any other arrow - Approx. 5% FOC even with no nock or insert!

Momentum TDT 170 Specifications:

• Static Spine: .170" 

• Straightness Tolerance: +/- .003" 

• Weight Tolerance - 6-pack: +/- 1 grain 

• Weight: Full length bare shaft ~ 459 grains 

• Profile: Continuous .001"/inch taper 

• Internal Diameter: .204" 

• External Diameter Point End @ 30.5": .312" 

• External Diameter Nock End @ .5": .280" 

• Material: Woven Micro-Carbon  

• Insert Weight: Approx. 70 grains 

• Nock Weight: Approx. 7 grains 

• Qty Per Package: Six (6)

Momentum TDT 240 Specifications:

• Static Spine: .240" 

• Straightness Tolerance: +/- .003" 

• Weight Tolerance - 6-pack: +/- 1 grain 

• Weight: Full length bare shaft ~ 357 grains 

• Profile: Continuous .001"/inch taper 

• Internal Diameter: .204" 

• External Diameter Point End @ 30.5": .293" 

• External Diameter Nock End @ .5": .262" 

• Material: Woven Micro-Carbon  

• Insert Weight: Approx. 70 grains 

• Nock Weight: Approx. 7 grains 

• Qty Per Package: Six (6)

Momentum TDT 320 Specifications:

• Static Spine: .320" 

• Straightness Tolerance: +/- .003" 

• Weight Tolerance - 6-pack: +/- 1 grain 

• Weight: Full length bare shaft ~ 323 grains 

• Profile: Continuous .001"/inch taper 

• Internal Diameter: .204" 

• External Diameter Point End @ 30.5": .288" 

• External Diameter Nock End @ .5": .256" 

• Material: Woven Micro-Carbon  

• Insert Weight: Approx. 70 grains 

• Nock Weight: Approx. 7 grains 

• Qty Per Package: Six (6)

Momentum TDT 400 Specifications:

• Static Spine: .400" 

• Straightness Tolerance: +/- .003" 

• Weight Tolerance - 6-pack: +/- 1 grain 

• Weight: Full length bare shaft ~ 273 grains 

• Profile: Continuous .001"/inch taper 

• Internal Diameter: .204" 

• External Diameter Point End @ 30.5": .275" 

• External Diameter Nock End @ .5": .252" 

• Material: Woven Micro-Carbon  

• Insert Weight: Approx. 70 grains 

• Nock Weight: Approx. 7 grains 

• Qty Per Package: Six (6)

The Broadhead Pro is easy to use and it's great for in the field touch-ups of knives and broadheads. 

It will not only sharpens straight edged broadheads but also; concave, convex, & multi-bladed broadheads. 

It's a handy knife sharpener too. 

Tru-Angle files, Lansky systems, Spyderco systems, Archers Edge sharpeners, ceramic sticks, etc..... you name it. They all work, but are limited in what type of head they can sharpen, they're heavy (the Broadhead Pro only weighs 1 oz.), bulky, require set-up and are often tricky to use. 

The Broadhead Pro is designed to take the guesswork out of sharpening by maintaining the correct sharpening angles for you. 

Simply place the Broadhead Pro flat side down (the thin section with the v-groove) on any firm surface and draw the broadhead through it. Because the micro carbon carbide sharpening blades (92.6 Rockwell) are harder than the steel, they literally "shave" steel off the broadhead until a perfect 20-degree shoulder is formed. 

Broadhead ferrules don't get in the way, like they do with flat files, so you'll always maintain that proper angle, whether sharpening for the first time or putting an edge back on. 

Broadhead Prowill never destroy your broadheads temper, unlike heat-generating, grinding-wheel type sharpeners. 

Like your broadhead blades honed and polished for the finished edge? 

The Broadhead Pro features a hardened ceramic honing surface chemically bonded to its anodized aluminum handle (C65 on the Rockwell Hardness Scale). 

Use it like a whetstone - - it won't wear off. The rounded edges of the body will sharpen serrated blades. And check out the bottom edge - there’s a V-groove for sharpening fishing hooks. 

The Broadhead Pro comes with a Lifetime Warranty. 

Tip: If your carbide blades eventually loose effectiveness simply unbolt and reverse the blades - you'll get a lot more use out of the sharpener. 

Replacement blades are also available making it a lifetime tool.

Sharpening Tips:

• Use only light downward pressure, excessive force can cause chattering and chip cutter blades. 
• Pull towards yourself when sharpening. Never push away. 
• If a broadhead resists being sharpened, use more strokes, not more pressure. 

We designed it for our GrizzlyStik line of single bevel broadheads but our customers report that it works well on any single bevel broadhead with a 25 degree edge bevel. 

The single bevel Broadhead Pro has the same rugged construction as our long selling double bevel Broadhead Pro but this one sharpens single bevel broadheads. With its separate sharpening slots, you can sharpen either left or right bevel broadheads. It doesn't matter if your single bevel broadheads are concave, convex or straight, the single bevel Broadhead Pro does them all.

The Broadhead Pro is designed to take the guesswork out of sharpening and ensures the same sharpening angle every time. 

Simply place the Broadhead Pro thin bottom section (with the v-groove) flat side down on any firm surface and draw the broadhead through it. Because the microcarbon carbide sharpening blades (92.6 Rockwell) are harder than the broadhead steel, they literally "shave" steel off the broadhead until a nice edge is established. 

The broadhead ferrule doesn’t get in the way, like it does with flat files, so you'll always maintain that perfect angle, whether sharpening for the first time or putting an edge back on.

Bonus Feature! 
The Broadhead Pro features a hardened ceramic honing surface chemically bonded to its anodized aluminum handle (C65 on the Rockwell Hardness Scale). Use it like a whetstone - - it won't wear off. The rounded edges of the body will sharpen serrated blades. And check out the bottom edge - there's a V-groove for sharpening fishing hooks. 

The Broadhead Pro comes with a Lifetime Warranty*. 

Sharpening Tips: 
• Use only light downward pressure, excessive force can cause chattering and chip cutter blades. 
• Pull towards yourself when sharpening. Never push away. 
• If a broadhead resists being sharpened, use more strokes, not more pressure. 


GrizzlyStik Exclusive!

Since their inception, GrizzlyStik forged broadheads have taken scores of elephant and hundreds of Cape buffalo and Asiatic water buffalo. You can't beat these tough agressive heads for anything in North America, African plains game and even Africa's big five and dangerous seven.

If you're a serious trophy hunter - you invest immeasurable time and effort into your hunts. When it's all on the line, make sure you're shooting enough arrow and broadhead. Don't take chances with your deer tackle. Shoot GrizzlyStik full-length tapered carbon arrows and our forged one-piece single bevel broadheads. You concentrate on the shot, and we'll take care of the rest...

Dr. Ed Ashby's reports have proven that the thick, heavy, single bevel broadheads are the best in penetration and especially in "bone busting". The BIG game success of the popular Silver Flame broadhead proved the effectiveness of the convex broadhead shape. Combining the two to produce the ultimate convex head was an easy decision for us. We named it "Nanook" after the the most effective predator if the far North. If you're a fan of convex broadheads and you're ready to take on some really BIG game, consider the Nanook single bevel broadhead. It is "putting down" some pretty big game all over the world right now. Try a pack of Nanook broadheads today. All our GrizzlyStik single bevel broadheads are earning the reputation as the ONLY choice when bowhunting the largest of game. Why not shoot a GrizzlyStik Broadhead? Why not shoot the best?

The Nanook is a one-piece broadhead, 1.19" x 3.28", forged from a solid piece of 440C stainless steel. There are no weak points. Of course they offer our signature bone busting tanto tip. All edges, including the trailing edge are honed razor sharp at the factory. 

Available in 315 grains. 

Right Bevel Only.

Note: Always match right bevel with right helical vanes/feathers.

Nanook 315 Broadheads:

♦  Hammer forged from 440C Stainless Steel

♦  One-Piece forged construction eliminates any weak spots

♦  Convex edge design

♦  CNC Milled for perfect symmetry and alignment

♦  Smooth transition, low profile ferrule

♦  Wide ground - bone splitting 25° offset single bevels

♦  Unmatched sharpness, ready to hunt out of the package

♦  Tanto - No skip tip

♦  1.19" W x 3.28" L

♦  .072" Blade Thickness

♦  58 Rockwell Hardness

♦  Ferrule diameter .370"

♦  315 grains

♦  Screw in

♦  Right Bevel Only

♦  3 per pack

♦  Hard plastic carrying case 

GrizzlyStik Broadhead Guarantee

You read that right, we even guarantee them! We’re proud of the quality and the effectiveness of our broadheads. We’re so confident that our single bevel and double bevel broadheads are the best in the business that we’re offering a special guarantee on all GrizzlyStik broadheads. For twelve (12) months from the date of purchase, if any GrizzlyStik broadhead fails in a hunting situation, we will replace it.