These diamond lapping films are excellent for refining your edges to an incredible level of both sharpness and polish.

KME diamond lapping films are an economical way to achieve true mirror polishes on your bevels or to just take your blades sharpness to the next level.

Available in:

9 micron - 1,800 grit

6 micron - 3,000 grit

3 micron - 6,000 grit

1 micron - 16,000 grit

.5 micron - 60,000 grit

.1 micron - 160,000 grit

Each grit size comes with 5 strips of lapping film.

Instructions: We strongly advise working with only one film grit and glass blank at a time because the colors of some grits are very similar and can be easily confused. 1) Remove plastic from back of the strip to expose adhesive. 2) Secure strip to the glass blank. Be careful to align the strip fairly straight on the glass blank. Before use, the strip can be removed and repositioned if necessary. Use a hair dryer briefly to loosen the adhesive prior to removing a worn strip.

Use only downward, away from the edge strokes just like stropping. Upward, into the edge strokes can cut the films.

Use Zero muscle pressure. Literally, just the weight of the stone holder and glass blank. Each self-adhesive strip will service about 5-7 knives but we’ve gotten over 10 blades by going very lightly with them. Adding pressure will significantly shorten the service life of each strip though.

We’ve found that a lightweight oil is hands down, the best lubricant to use on these diamond films. You can even use vegetable oil if you like. We offer a small dropper bottle of honing oil that is perfect for use with them.

THIS SALE IS FOR ONE SET ( 5 FILMS) ONLY, PLEASE LET US KNOW WHICH VARIATION YOU WANT, BY EMAILING US AT : sales@silverarchery.co.uk

These diamond lapping films are excellent for refining your edges to an incredible level of both sharpness and polish.

KME diamond lapping films are an economical way to achieve true mirror polishes on your bevels or to just take your blades sharpness to the next level.

Available in:

9 micron - 1,800 grit

6 micron - 3,000 grit

3 micron - 6,000 grit

1 micron - 16,000 grit

.5 micron - 60,000 grit

.1 micron - 160,000 grit

Each grit size comes with 5 strips of lapping film and one tempered glass blank in a double sided vinyl sleeve that keeps the unused films clean and separate from the glass blank.

Instructions: We strongly advise working with only one film grit and glass blank at a time because the colors of some grits are very similar and can be easily confused. 1) Remove plastic from back of the strip to expose adhesive. 2) Secure strip to the glass blank. Be careful to align the strip fairly straight on the glass blank. Before use, the strip can be removed and repositioned if necessary. Use a hair dryer briefly to loosen the adhesive prior to removing a worn strip.

Use only downward, away from the edge strokes just like stropping. Upward, into the edge strokes can cut the films.

Use Zero muscle pressure. Literally, just the weight of the stone holder and glass blank. Each self-adhesive strip will service about 5-7 knives but we’ve gotten over 10 blades by going very lightly with them. Adding pressure will significantly shorten the service life of each strip though.

We’ve found that a lightweight oil is hands down, the best lubricant to use on these diamond films. You can even use vegetable oil if you like. We offer a small dropper bottle of honing oil that is perfect for use with them.

Jende Nanocloth Ultra bench strops are on the cutting edge of stropping technology! The honeycomb structure fills with abrasives making for a stropping medium that is different and more dynamic than traditional leather and other stropping materials.

The 1x4" size works perfectly with the KME Sharpener, and is the perfect for field use or as a travel strop. Please note that these strops do not come with our Poly Diamond or CBN Emulsions.

    The Jende Nanocloth Ultra is a synthetic stropping material that has no weave, so feedback is the same in all directions. Other weaved strops tend to have noticeable resistance change feedback variations, like a rug when vacuuming, which can make you second guess your stropping stroke.

    The Honeycomb structure is very consistent. The shape allows the emulsions to fill up the honeycombs, keeping more abrasive on the strop and off your knife. The shape also fills up and beads on the surface, giving a snow-shoe effect with even scratches when stropping.

    The depth of the honeycomb has little compression – less than leather in general.

     Because of the depth of abrasive in the honeycomb tubes, differential pressure can be used to give the strop more or less aggression by adding pressure for more aggression, and super light strokes to just tickle the edge for finish stropping.

    The color-coded Acrylic base allows you to instantly recognize the grit strop you desire to use, saving time and confusion.

    Laser etched to ensure long-lasting and clear identification marks.

    Works equally well with our Jende Poly Diamond Sprays, Jende Poly Diamond Emulsions, and our Jende CBN Emulsions.

Note: Always strop straight away from the cutting edge! Any movement that is into the edge will instantly result in the blade cutting into the strop.

.1 Micron = 13,000 grit

.5 Micron = 60,000 grit

1.5 Micron = 13,000 grit

4 Micron = 4,000 grit

The 4 micron CBN emulsion used in conjunction with one of our new Kangaroo leather strops is quite possibly the single most impressive sharpening accessory we’ve ever used and every single person who’s tried it agrees. One kangaroo strop and one bottle of 4 micron CBN emulsion are “must have” items!

KME Sharpening System- Gold Series "The Beast" 50-Grit Diamond Hone

Our Double Clamp Bar snaps right into your KME Knife Sharpener. It’s quick and easy both to install and remove. Just remove the jaws from your sharpener and attach the clamp bar like you were swapping out jaws.

Provides excellent blade support when sharpening your longer Chef’s knives and long heavy bushcraft knives. Also excellent for sharpening fillet knives, boning knives, and other thin flexible knives when used with one set of our Pen Knife Pro Jaws to securely hold these highly flexible blade tips.

Clamps are freely adjustable in the bar until the blade is clamped. Tightening the lever clamps the blade and locks the clamp in place at the same time. Fine tuning each clamps exact position in the bar can be done quickly and easily with a knife in the jaws. Leaving the clamps loose allows for fine clamp and blade position adjustments before tightening fully.

The adjustable lever arms provide greater clamping power when tightening the clamp and they’re adjustable too! After tightening the clamp, if the lever arm is sticking up and interfering with sharpening (any position other than horizontal), simply pull straight back on the spring-loaded lever arm to disengage it from the locked position, rotate the lever to the horizontal position with the arm pointed out away from the sharpener, and release. The lever will spring back and reengage for loosening after you’re done sharpening.









As with all KME products the Double Clamp Bar and all its components are Made in the USA.
The double Clamp Bar comes with: 8’ machined aluminum bar with slots for two clamps 2 clamp assemblies with spring loaded adjustable lever arms 1 set of Standard LP Jaws

*This accessory does not increase the length of blades that can be sharpened. The maximum blade length is still a bit over 10” of actual cutting edge. It does make sharpening longer knives and fillet knives far easier and maintains perfect bevel geometry right to the very tip of the knife.

Note: We cannot substitute Pen Knife Pro jaws for the LP jaws at this time.

Installing your LP jaws in the empty clamp assembly.

Step 1- Remove standard LP jaws from your knife sharpener.

Step 2- To remove the empty clamp assembly from the Double Clamp Bar: Loosen the clamp lever till it comes completely off the T-stud. The clamp assembly will fall out. (Don’t lose the flat washer under the lever.)

Step 3- Install the LP jaws from your sharpener in the empty clamp assembly by inserting the jaws and T-stud into the base plate as you would when changing jaws in the sharpener.





Step 4- Place the loose clamp assembly back into the double clamp bar. The stud will be extending out of the back. From the back side, place the washer on the stud, then thread the clamp lever on to secure the assembly in the bar.

Installing the Double Clamp Bar

Step 1- With no jaws in the sharpener, back the 3-wing knob way off as you would if you were changing jaws.

Step 2- Push the spring knob forward to extend the T-head bolt well out in front of the base plate.

Step 3- While keeping the spring knob pushed forward, slip the end of the T-bolt through the opening in the clamp bar and rotate the bar as necessary to allow the clamp bar to seat inside the base plate.





Step 4- Rotate the clamp bar and base plate together until the T-bolt is perpendicular to the rectangular opening in the clamp bar.





Step 5- Release the spring knob, then rotate the clamp bar and baseplate to engage the detents.

Step 6- Make sure the T- bolt end is still perpendicular to the rectangle opening in the bar, then tighten the 3 wing knob to lock the clamp bar into the sharpener.

KME Broadhead Jaws

Sharpening contemporary, traditional, and concave cut-on-contact broadheads just got easier with the new KME Broadhead Jaws. 

Now you can use your KME knife sharpener to sharpen your 2 blade broadheads and duplicate almost any factory bevel angle. The KME Broadhead Jaws are cut at an angle so you simply put the broadhead in the jaws with the ferrule tight against the jaws. 

With our standard 4 stone ceramic knife sharpening kit or our 3 diamond stone kit, you're good to go on all modern cut-on-contact broadheads. 

Our Gold Series XXC-100 and XC-140 grit diamond hones are excellent for establishing bevels. Even thick laminated tip glue-on broadheads can be quickly and professionally sharpened. 

For concave broadheads like the Simmons, these broadhead jaws used with our Jewelstik 3 sided convex diamond hone is the ultimate sharpening set-up.

NEW KME broadhead jaws made in the U.S.A.

With the broadhead jaws sharpening broadheads is as easy as sharpening a knife!

These strops attach to the KME Knife Sharpening rods and can either be uses simply as a final finishing tool or... If you add our CBN abrasives you'll have the most amazingly polished edges you can imagine!

Note: You will need a speparate strop for each grit of CBN you want to use.

The strops are made from premium Kangaroo leather permanently mounted on a flat aluminum plate with all 4 edges of the strop beveled. 

The leather is trimmed flush, then each edge of the leather is beveled to prevent the edges and corners from catching or lifting.

Each strop comes in a heavy weight vinyl storage sleeve.

KME Gold Series XXCoarse-100 grit Diamond Hone

Size: 1" x 4" x 3/16" (For use with the KME Knife Sharpening System)

XXCoarse - 100 grit: The Metal Excavator. With a mixture of diamond particles ranging from 80 to 100 grit, this is the most aggressive hone of any kind we’ve ever used. Use it for major blade repair and serious reprofiling - or whenever large amounts of steel need to be removed quickly.

Like all our KME Gold Series diamond hones, the diamonds are so well attached to the base plate that we have yet to be able to wear one out. (And we sharpen lots of knives!)

Keep all your stones, strops, and accessories organized and at your fingertips!

Our new 5-1/4”x 5-1/4”x 2” deep stone storage box will hold approximately 20 grits of various stones, strops, or films, the base post, stone carrier, and even an extra set of jaws. This box is made in the USA for KME by the ammo case company MTM Molding

Simply cut a 5-1/4”x 5-1/4” square out of the base layer of foam in the knife sharpening kit and drop the storage box in. The foam you cut out can even be trimmed to fit inside the new stone storage case if you don’t have enough stones to fill it entirely.

Here’s a very cool soft case in a compact size for taking your sharpener and a few stones with you wherever you go. Perfect for weekend camping or hunting trips or even longer outings where a compact, portable kit is necessary.

Made in the USA, this soft case is heavy duty Cordura fabric on the outside with a full 1/2” of padding on the inside. The case has a full wrap, heavy duty zipper for securely keeping the stones and sharpener in place. The case also has a pocket sewn into the inside seam to prevent the guide rod from falling out or getting lost. Get workshop grade sharpening precision by the campfire!

Note: This is the case only - Knife kit is not included.

You asked and we listened. Here it is- Everything you could possibly need to handle almost any sharpening job, all together in one compact, portable kit.

The Deluxe Kit Includes: 

The KME Precision Knife Sharpening System, 

The Base, 

The Stone Thickness Compensator, 

Eleven grits included! 

All 6 grits of our Gold series Diamond Hones: 

The 50 grit Beast 

The XXC-100 

The XC-140 

The Coarse-300 

The Fine-600 

The X-Fine-1500

And our popular set of four ceramic/Arkansas stones: 

The X-Coarse-60 grit 

The Coarse-120 grit 

The Medium-320 

The medium-fine Hard Arkansas stone 

And for getting your edges to the next level, the Deluxe Kit also includes: 

1 Kangaroo Leather Strop 

1 Bottle of 4 micron CBN Emulsion (4,000 grit)

360 Degree rotational Clamp with 2 Horizontal Stops: 

Just grab the knife handle and rotate it 180 degrees 

to sharpen both sides of the blade.

Just One Large Hand Knob Clamps the Blade:

No more adjusting the clamp for blade thickness with 

one screw, then clamping with a separate thumb nut

Neoprene Padded Jaws:

Clamp will not scratch or mar the blade.

Two Knife Positioning Reference Lines on the Jaw:

Insures repeatable sharpening angle for individual 

knives.

Jaws Open on Demand

Revolutionary Spherical Bearing Rod Guide:

Maintains absolute zero deviation from selected 

sharpening angle at all times, while providing 

excellent range of silky smooth motion

Infinitely Adjustable Sharpening Angle - 17 to 30 Degrees:

Main frame is engraved with angle scale in single

degree increments. Loosen thumb nut to raise or 

lower the bearing assembly to any desired sharpening 

angle.

Does NOT include the knife sharpening system or the base shown in the picture!!!! 

True radius, convex bevels are now possible with a guided system! Our new convexing guide rod screws right into any KME stone carrier.

The convexing rod is formed in a smooth uniform curve which results in approximately 5 degrees of angle change from the beginning of each stroke to the end.

This gradual, 5 degree angle change produces beautifully rounded bevels which were previously only possible by free-hand sharpening with sandpaper on a soft backer pad or with belt sanders.

Includes an adjustable stop to prevent the possibility of scratching your blades, and a knurled thumb nut for locking the rod in place in perfect position.

Does NOT include the knife sharpening system or the base shown in the picture!!!! 

Here’s an awesome accessory diamond hone for your Knives and broadheads.

This hone is particularly well suited for sharpening recurve blades, Karambits, Kukris, or any other knife or broadhead with a concave blade design.

This is an excellent solution for sharpening Simmons broadheads with the KME knife sharpening system.

Custom made in the USA for KME by Hewlett MFG, this hone has 3 oval shaped sharpening surfaces making it perfect for sharpening even the most extreme concave blade designs.

Three grits on one hone: Coarse (270), Medium (600), & Fine (1800) grits.

5" long, w/three 1/2" wide sides.

Includes a KME 11” x 5/32 diameter guide rod which attaches to the hone with a close tolerance friction fit. Just push the rod a few inches into the hone. The rod can be installed in either end of the hone so that the entire diamond surface can be utilized. (Does NOT include the knife sharpening system or the base shown in the picture.)

About using rounded hones:

When using rounded hone, care must be taken not to round over the tips of your knives.

This is because unlike a wide flat stone, a rounded rod has a very small area of blade contact. It is easy to go just a bit too far and slip passed the tip which will cause the point or tip to be deformed or rounded over slightly. You can be fairly aggressive throughout the length of the blade but be very careful when you sharpen the tip section.

The new KME stone thickness compensator enables fast, easy and extremely accurate angle adjustment when using stones of different thicknesses.

The kit includes an extended front plate for your stock ball and race assembly. Remove the assembly screw, swap your stock front plate with the extended front plate and you’re set to go. The stone thickness compensator clips right onto the sharpener and provides a baseline for adjusting the sharpening angle perfectly for any stone- thick or thin

The KME Scissor and Shear Sharpening Attachment - 

Now you can sharpen your scissors and shears to professional standards!

Our scissor sharpening fixture was designed with accuracy, performance, and versatility in mind. 

Our unique clamp design allows the opposing shear to swing well passed 90 degrees vertical, permitting sharpening of most shears without the need for disassembly.

With this accessory, you can easily restore and sharpen the edges of:

• Fine quality beautician’s shears

• Fabric and quilting shears

• Kitchen/butcher’s shears

• Office and household scissors

• …and more!

Simply clamp this fixture into your KME knife sharpener jaws then secure your scissor in the fixture. Color your bevel with the Sharpie marker and adjust the angle as usual. For in more detailed instructions on how to use the scissor and shear fixture, please watch the video:https://www.youtube.com/watch?v=_2H8StMO1vc

Dan’s honing oil is recommended to be used with your sharpening stones during and after sharpening. Small metal shavings are made when you sharpen your blade and these can clog the pores in your stone. Dan’s honing oil is a light mineral oil that helps keep your stone’s pores from getting clogged. The oil is necessary to maintain the effectiveness of your stone. In addition, it is a good all purpose lubricant for many of your household needs to include squeaky hinges and sewing machines.

Knife Sharpening System Accessory Base holds the KME Knife Sharpening system so you can work from a table top.

This is a 'Must Have" accessory for the KME Knife Sharpening System.